BOSS India - Support - BR-800 - Updates & Drivers - BR-800 Driver Ver.1.0.0 for Windows Vista 64-bit Edition

BR-800 Driver Ver.1.0.0 for Windows Vista 64-bit Edition

This is the BR-800 driver for Microsoft(R) Windows Vista(R) 64-bit Edition.

FEATURES

This driver also supports ASIO (Steinberg Audio Stream I/O Interface) 2.0.

SOFTWARE INSTALLATION

Please refer to the "Readme.htm" for details.
You will find the file in the folder that you downloaded and expanded.

SYSTEM REQUIREMENTS
This driver has the following requirements.

Operating System

Microsoft(R) Windows Vista(R) 64-bit Edition
* This does not work with the 32-bit Edition of Windows Vista.

Computer

A computer with a USB connector that supports USB Specification Revision 1.1 or higher
* Macintosh computers running Microsoft Windows are not supported.

Caution when using the Windows Vista 64-bit Edition

In order to use this product with the 64-bit Edition of Windows Vista, please read and understand the following points. You must also take into account the compatibility of each product you will be using.

* The maximum amount of memory supported by a 64-bit Edition of Windows Vista will vary depending on which edition of Windows Vista you use, and the specifications of your PC's motherboard.
* In order to use the 64-bit Edition of Windows Vista, you must use 64-bit drivers; not only for this product, but also for all hardware you're using with your computer.
* If you are using plug-ins with 64-bit compatible DAW software, the plug-ins you use must also support 64-bit operation.
* This driver has been tested on several computer systems, but please understand that we cannot guarantee it will operate on your particular computer. Depending on the combination of your computer system and software, there may also be cases in which you might not obtain the expected performance.

* Microsoft, Windows and Windows Vista are registered trademarks of Microsoft Corporation.
* ASIO is a trademark of Steinberg Media Technologies GmbH.
* All product names mentioned in this document are trademarks or registered trademarks of their respective owners.

* All files and other material contained in this folder are copyrighted by the Roland. Any alteration, modification, duplication, distribution, or reproduction of this material is prohibited. Additionally, Roland reserves the right to make changes to these programs and files without prior notice.

Copyright (C) 2010 Roland Corporation. All rights reserved.

Roland Software License Agreement

In no event shall Roland Corporation be liable to end-users for any damages whatsoever, including but not limited to financial damages for any loss of profits or information arising from the use of, or inability to use this updater. The foregoing provision is effective even if Roland Corporation has been advised of the possibility of such damages.

This is a legal agreement between you (an individual or a corporation) and Roland Corporation (herein referred to as "Roland") regarding the usage of this software product (herein referred to as "SOFTWARE"). Please read carefully the terms of this License Agreement before installing or using the SOFTWARE. By installing, copying, or starting the use of the SOFTWARE, you hereby consent to the terms of this License Agreement.

1. GRANT OF LICENSE

Roland grants you the following non-exclusive rights to use the SOFTWARE in accordance with the terms of this License Agreement.
(a) You may only use the SOFTWARE on a specific single computer at one time. Use of the SOFTWARE shall include loading the SOFTWARE into temporary memory (i.e., RAM) or installing the SOFTWARE into storage media (i.e., hard disk) of the computer on which you will use the SOFTWARE.
(b) You may make one copy of the SOFTWARE for backup purposes only (on floppy disk, magneto optical disk, DAT or the similar media), but you are prohibited to make any other copy.

2. COPYRIGHT

The SOFTWARE and its copyrights are the property of Roland and are protected by all international copyright laws and treaties.
Therefore, you must treat the SOFTWARE like any other copyrighted material (i.e., a book or a CD). All rights that are not provided for herein are reserved by Roland.

3. OTHER RESTRICTIONS

(a) You shall not modify, change, reverse engineer, decompile, or disassemble the SOFTWARE and the copyright notice and copyrighted logo.
Unauthorized copying, uploading to another network, distributing, modifying and/or attaching this software to other media or any other sales item is expressly forbidden.
(b) You shall not loan, rent, lease, sublicense or transfer the SOFTWARE, either in whole or in part, to any third party. But you may permanently transfer the SOFTWARE and accompanying printed materials provided you retain no copies of the Software and recipient agrees to the terms of this License Agreement. If the SOFTWARE has been updated or upgraded, any transfer of the SOFTWARE must include the most recent update and all prior versions.
(c) If this SOFTWARE contains multiple templates of media (such as floppy disks and CD-ROM) and these media contain the same software, you may use only the one form of media that is appropriate for your computer. You shall not use the remaining form(s) of media on another computer.
(d) You may not use the Software from multiple locations of a multi-user or networked system at any time.

3.2 Open source software and other third party software
(a) The SOFTWARE may use open source software and other third party software (herein referred to as "OSS, etc.").
(b) The OSS, etc. in the case of the preceding paragraph shall be subject to the OSS, etc. license (herein referred to as "OSS License"), and you shall comply with the OSS License.
(c) If there are any differences between the terms of this License Agreement and the OSS License, the OSS License shall prevail and the terms of this License Agreement shall not apply.

4. NO WARRANTY

Roland makes no warranty, either expressed or implied, with respect to any of the software, including, without limitation, any implied warranties of merchantability or fitness for a particular purpose.

5. NO LIABILITY

Roland can not reply to inquiries regarding this system software updater. Please read the instructions completely, and please note that you should use the SOFTWARE AT YOUR OWN RISK.
In no event shall Roland be liable to end-users for any damages whatsoever, including but not limited to financial damages for any loss of profits or information arising from the use of, or inability to use this product. The foregoing provision is effective even if Roland has been advised of the possibility of such damages. Even if the SOFTWARE has any material, verifiable, and reproducible program errors, Roland shall have no liability to modify such errors.

6. TERMINATION OF THE LICENSE

Roland reserves the right to terminate this License Agreement if you fail to comply with any of the terms of this License Agreement. Upon such termination, you shall immediately stop using the SOFTWARE.

7. GENERAL

(a) Any provision of this Agreement which is prohibited or unenforceable in any jurisdiction shall be ineffective to the extent of such prohibition or unenforceability without affecting, impairing or invalidating the remaining provisions hereof.
(b) This License Agreement shall be governed by and construed in accordance with the laws of State of California without reference to the principles of conflicts of laws.

BR-800 Driver Ver.1.0.0 for Windows Vista 64-bit Edition

Support

Quick Links