BOSS India - Support - BR-800 - Updates & Drivers - BR-800 System Program (Ver.1.10)

BR-800 System Program (Ver.1.10)

This system program updates the BR-800 system program to the latest version 1.10.

Update history

[ Version 1.10 ]

The user patches for an insert effect can be copied to song patches in the same bank, or song patches can be copied to user patches in the same bank.
MOVE (for moving data) and EXCHANGE (allows you to replace data) have been added to the functions available for editing tracks.

(Refer to the "Additional Functions in Version 1.1" (BR-800_l_v1.1_e01.pdf) for details.)

[ Version 1.06 ]

BR-800 might not work correctly when connecting to a personal computer on the USB storage mode.

What you will need to update your BR-800

BR-800
A SD Card (We recommend the SD Card came with BR-800)
* The SD card need to be formatted on a BR-800 and have 2MB or more free space.
A computer with a SD Card Reader/Writer.

Caution when performing the update

Never apply this update data to any product other than the BR-800. This update data may destroy the data or system program of other products.
When you update, use an attached AC adaptor as the power source. Never use a battery or USB-bus power.
If a power failure or similar accident occurs during the update process, the BR-800 won't be able to start up in normal operating mode. This will require servicing, so you will need to contact Roland service center near you if this occurs.
We regret that we are unable to answer questions regarding the update procedure using this system program. Please perform the update responsibly, following the directions given in this document.

Getting the update file

Please open/extract the downloaded "br800_sys_v110.zip" file on your computer to get the four update files named "_BOOTPRG.BR_", "_BR_PROG.BR_", "_BR_RHYM.BR_" and "_UPDINFO.BR_" in the "br800_sys_v110" folder.

Procedure for the update

Creating the Update Card

Use a computer with a SD Card Reader/Writer to copy the four update files onto the root directory of an SD memory card.
* Do not copy the "br800_sys_v110" folder.

* Don't LOCK the SD memory card.
* If you use a commercially available SD card, you must format it on the BR-800.

Update Procedure

Turn BR-800 power off.
Insert the SD memory card included the update files to BR-800 with the power turned off.
Turn BR-800 power on. Update program starts automatically.
* If this shows the latest version (Version 1.10 or later) at "OLD Version:", there’s no need to update your BR-800. Push the [EXIT] button. Then, after the message "CANCELED" will be displayed on the screen, turn BR-800 power off. In addition, delete the update files from the SD memory card for the normal usage.
SYSTEM UPDATER

OLD Version:1.06
NEW Version:1.10
Update System ?
................
................
................
................
Push the [ENTER] button to start updating.
Never power-off your BR-800 or un-mount the SD memory card while the update is in progress.
When the update processing is completed, the message "Complete!!" will be displayed.
Turn BR-800 power off, and un-mount the SD memory card.
Delete the update files from the SD memory card for the normal usage.

Roland Software License Agreement

In no event shall Roland Corporation be liable to end-users for any damages whatsoever, including but not limited to financial damages for any loss of profits or information arising from the use of, or inability to use this updater. The foregoing provision is effective even if Roland Corporation has been advised of the possibility of such damages.

This is a legal agreement between you (an individual or a corporation) and Roland Corporation (herein referred to as "Roland") regarding the usage of this software product (herein referred to as "SOFTWARE"). Please read carefully the terms of this License Agreement before installing or using the SOFTWARE. By installing, copying, or starting the use of the SOFTWARE, you hereby consent to the terms of this License Agreement.

1. GRANT OF LICENSE

Roland grants you the following non-exclusive rights to use the SOFTWARE in accordance with the terms of this License Agreement.
(a) You may only use the SOFTWARE on a specific single computer at one time. Use of the SOFTWARE shall include loading the SOFTWARE into temporary memory (i.e., RAM) or installing the SOFTWARE into storage media (i.e., hard disk) of the computer on which you will use the SOFTWARE.
(b) You may make one copy of the SOFTWARE for backup purposes only (on floppy disk, magneto optical disk, DAT or the similar media), but you are prohibited to make any other copy.

2. COPYRIGHT

The SOFTWARE and its copyrights are the property of Roland and are protected by all international copyright laws and treaties.
Therefore, you must treat the SOFTWARE like any other copyrighted material (i.e., a book or a CD). All rights that are not provided for herein are reserved by Roland.

3. OTHER RESTRICTIONS

(a) You shall not modify, change, reverse engineer, decompile, or disassemble the SOFTWARE and the copyright notice and copyrighted logo.
Unauthorized copying, uploading to another network, distributing, modifying and/or attaching this software to other media or any other sales item is expressly forbidden.
(b) You shall not loan, rent, lease, sublicense or transfer the SOFTWARE, either in whole or in part, to any third party. But you may permanently transfer the SOFTWARE and accompanying printed materials provided you retain no copies of the Software and recipient agrees to the terms of this License Agreement. If the SOFTWARE has been updated or upgraded, any transfer of the SOFTWARE must include the most recent update and all prior versions.
(c) If this SOFTWARE contains multiple templates of media (such as floppy disks and CD-ROM) and these media contain the same software, you may use only the one form of media that is appropriate for your computer. You shall not use the remaining form(s) of media on another computer.
(d) You may not use the Software from multiple locations of a multi-user or networked system at any time.

3.2 Open source software and other third party software
(a) The SOFTWARE may use open source software and other third party software (herein referred to as "OSS, etc.").
(b) The OSS, etc. in the case of the preceding paragraph shall be subject to the OSS, etc. license (herein referred to as "OSS License"), and you shall comply with the OSS License.
(c) If there are any differences between the terms of this License Agreement and the OSS License, the OSS License shall prevail and the terms of this License Agreement shall not apply.

4. NO WARRANTY

Roland makes no warranty, either expressed or implied, with respect to any of the software, including, without limitation, any implied warranties of merchantability or fitness for a particular purpose.

5. NO LIABILITY

Roland can not reply to inquiries regarding this system software updater. Please read the instructions completely, and please note that you should use the SOFTWARE AT YOUR OWN RISK.
In no event shall Roland be liable to end-users for any damages whatsoever, including but not limited to financial damages for any loss of profits or information arising from the use of, or inability to use this product. The foregoing provision is effective even if Roland has been advised of the possibility of such damages. Even if the SOFTWARE has any material, verifiable, and reproducible program errors, Roland shall have no liability to modify such errors.

6. TERMINATION OF THE LICENSE

Roland reserves the right to terminate this License Agreement if you fail to comply with any of the terms of this License Agreement. Upon such termination, you shall immediately stop using the SOFTWARE.

7. GENERAL

(a) Any provision of this Agreement which is prohibited or unenforceable in any jurisdiction shall be ineffective to the extent of such prohibition or unenforceability without affecting, impairing or invalidating the remaining provisions hereof.
(b) This License Agreement shall be governed by and construed in accordance with the laws of State of California without reference to the principles of conflicts of laws.

BR-800 System Program (Ver.1.10)

Support

Quick Links