BOSS India - Support - GT-1000CORE - Updates & Drivers - GT-1000CORE System Program (Ver.1.01)

GT-1000CORE System Program (Ver.1.01)

WHEN USING GT-1000CORE Ver.1.01 IN COMBINATION WITH BOSS TONE STUDIO FOR GT-1000 AND THE GT-1000 DRIVER

Use the most up-to-date versions in combination, as described below.

Windows 10 users

GT-1000CORE System Program Ver.1.01

BOSS TONE STUDIO for GT-1000 Ver.3.1.3 for Windows or later

GT-1000 Driver Ver.1.1.0 for Windows 10

Windows 7 / Windows 8.1 users

GT-1000CORE System Program Ver.1.01

BOSS TONE STUDIO for GT-1000 Ver.3.1.3 for Windows or later

GT-1000 Driver Ver.1.1.0 for Windows

macOS 10.15 users

GT-1000CORE System Program Ver.1.01

BOSS TONE STUDIO for GT-1000 Ver.3.1.3 for macOS / OS X or later

GT-1000 Driver Ver.1.0.1 for macOS 10.15

macOS / OS X users

GT-1000CORE System Program Ver.1.01

BOSS TONE STUDIO for GT-1000 Ver.3.1.3 for macOS / OS X or later

GT-1000 Driver Ver.1.0.0 for macOS / OS X

HOW TO KNOW THE VERSION

Before you start, check the system program version of your GT-1000CORE.

While holding down [ EXIT ] button, turn power ON.
Continue to hold down EXIT until the GT-1000CORE logo appears on the display.
After a short while, the version information appears on the display.
If this shows the latest version (Version 1.01 or later), there's no need to update your GT-1000CORE.
After verifying the displayed version, turn off the power.

UPDATE HISTORY
[ Ver.1.01 ] OCT 2020

Bug Fixes
The following bugs were fixed.

Under certain conditions, VIBRATO fails to work as desired when switching patches.
Behavior is not as desired when the STEREO LINK parameter for SP.SIMULATOR is set to OFF.
The effect level sometimes rises when CARRYOVER is active.
Under particular conditions, the DUCK parameter for REVERB fails to operate as desired when patches are switched.
Other minor bugs.

WHAT YOU WILL NEED TO UPDATE YOUR GT-1000CORE

GT-1000CORE
USB cable
* The update is carried out with the unit and the computer connected via USB.
Provide a cable suitable for connection to the computer you're using.
Computer (Windows or Mac) equipped with a USB port compliant with USB 2.0

CAUTION WHEN PERFORMING THE UPDATE

If you update on the normal mode of GT-1000CORE against the correct procedrue, this update data may destroy the system program.
Never power-off your GT-1000CORE while the update is in progress!
If a power failure or similar accident occurs during the update process, the GT-1000CORE won’t be able to start up in normal operating mode. This will require servicing, so you will need to contact Roland service center near you if this occurs.
We regret that we are unable to answer questions regarding the update procedure using this system program. Please perform the update responsibly, following the directions given in this document.

GETTING THE UPDATE FILE

Download the file named "gt1000core_sys_v101.zip".
Please open/extract the downloaded "gt1000core_sys_v101.zip" file on your computer to get the update file in the "gt1000core_sys_v101" folder.

PROCEDURE FOR THE UPDATE

Hold down [ WRITE ] button and turn on the power.
* Continue to hold down WRITE until "GT-1000CORE Updater" appears on the display.
Connect the computer to the GT-1000CORE's USB port by a USB cable.
Open the "GT-1000CORE" drive folder in your personal computer.
With Windows
Within My Computer (or Computer), open "GT-1000CORE" (or Removable Disk).
With macOS / OS X
On the desktop, open the "GT-1000CORE" icon.
Copy (drag and drop) the "GT-1000CORE_UPA_up.bin" in the "gt1000core_sys_v101" folder into the root directory of the "GT-1000CORE" drive.
After the copy has been completed, unmount or remove the drive on your computer.
With Windows
Right-click on the "GT-1000CORE" icon in My Computer (or the "Removable Disk (*:)" icon) and execute "Eject."
With macOS / OS X
Drag the "GT-1000CORE" icon to the Trush icon in the Dock.
Disconnect the USB cable.
The message "Execute update ? ([WRITE]: execute)" will appear on the display.
Press [ WRITE ] button to start the update process.
The message "Update completed. Turn off the GT-1000CORE." will appear on the display when the update process completes.
Turn the GT-1000CORE power off.
Follow the procedure for verifying the version to verify that the version has been updated.

Roland Software License Agreement

In no event shall Roland Corporation be liable to end-users for any damages whatsoever, including but not limited to financial damages for any loss of profits or information arising from the use of, or inability to use this updater. The foregoing provision is effective even if Roland Corporation has been advised of the possibility of such damages.

This is a legal agreement between you (an individual or a corporation) and Roland Corporation (herein referred to as "Roland") regarding the usage of this software product (herein referred to as "SOFTWARE"). Please read carefully the terms of this License Agreement before installing or using the SOFTWARE. By installing, copying, or starting the use of the SOFTWARE, you hereby consent to the terms of this License Agreement.

1. GRANT OF LICENSE

Roland grants you the following non-exclusive rights to use the SOFTWARE in accordance with the terms of this License Agreement.
(a) You may only use the SOFTWARE on a specific single computer at one time. Use of the SOFTWARE shall include loading the SOFTWARE into temporary memory (i.e., RAM) or installing the SOFTWARE into storage media (i.e., hard disk) of the computer on which you will use the SOFTWARE.
(b) You may make one copy of the SOFTWARE for backup purposes only (on floppy disk, magneto optical disk, DAT or the similar media), but you are prohibited to make any other copy.

2. COPYRIGHT

The SOFTWARE and its copyrights are the property of Roland and are protected by all international copyright laws and treaties.
Therefore, you must treat the SOFTWARE like any other copyrighted material (i.e., a book or a CD). All rights that are not provided for herein are reserved by Roland.

3. OTHER RESTRICTIONS

(a) You shall not modify, change, reverse engineer, decompile, or disassemble the SOFTWARE and the copyright notice and copyrighted logo.
Unauthorized copying, uploading to another network, distributing, modifying and/or attaching this software to other media or any other sales item is expressly forbidden.
(b) You shall not loan, rent, lease, sublicense or transfer the SOFTWARE, either in whole or in part, to any third party. But you may permanently transfer the SOFTWARE and accompanying printed materials provided you retain no copies of the Software and recipient agrees to the terms of this License Agreement. If the SOFTWARE has been updated or upgraded, any transfer of the SOFTWARE must include the most recent update and all prior versions.
(c) If this SOFTWARE contains multiple templates of media (such as floppy disks and CD-ROM) and these media contain the same software, you may use only the one form of media that is appropriate for your computer. You shall not use the remaining form(s) of media on another computer.
(d) You may not use the Software from multiple locations of a multi-user or networked system at any time.

3.2 Open source software and other third party software
(a) The SOFTWARE may use open source software and other third party software (herein referred to as "OSS, etc.").
(b) The OSS, etc. in the case of the preceding paragraph shall be subject to the OSS, etc. license (herein referred to as "OSS License"), and you shall comply with the OSS License.
(c) If there are any differences between the terms of this License Agreement and the OSS License, the OSS License shall prevail and the terms of this License Agreement shall not apply.

4. NO WARRANTY

Roland makes no warranty, either expressed or implied, with respect to any of the software, including, without limitation, any implied warranties of merchantability or fitness for a particular purpose.

5. NO LIABILITY

Roland can not reply to inquiries regarding this system software updater. Please read the instructions completely, and please note that you should use the SOFTWARE AT YOUR OWN RISK.
In no event shall Roland be liable to end-users for any damages whatsoever, including but not limited to financial damages for any loss of profits or information arising from the use of, or inability to use this product. The foregoing provision is effective even if Roland has been advised of the possibility of such damages. Even if the SOFTWARE has any material, verifiable, and reproducible program errors, Roland shall have no liability to modify such errors.

6. TERMINATION OF THE LICENSE

Roland reserves the right to terminate this License Agreement if you fail to comply with any of the terms of this License Agreement. Upon such termination, you shall immediately stop using the SOFTWARE.

7. GENERAL

(a) Any provision of this Agreement which is prohibited or unenforceable in any jurisdiction shall be ineffective to the extent of such prohibition or unenforceability without affecting, impairing or invalidating the remaining provisions hereof.
(b) This License Agreement shall be governed by and construed in accordance with the laws of State of California without reference to the principles of conflicts of laws.

GT-1000CORE System Program (Ver.1.01)

Support

Quick Links