BOSS India - Support - RC-500 - Updates & Drivers - BOSS TONE STUDIO for RC Ver.1.1.0 for Windows

BOSS TONE STUDIO for RC Ver.1.1.0 for Windows

When you use BOSS TONE STUDIO for RC

When using BOSS TONE STUDIO for RC, before you start, check the following points.

< RC-202 >

available
Set "USB Mode" to "mass storage mode."

< RC-3 >

Verify that the RC-3 itself is at the latest version.

< RC-30 >

Verify that the RC-30 itself is at the latest version.

< RC-300 >

Set "USB Mode" to "STORAGE."
Verify that the RC-300 itself is at the latest version.

< RC-505 >

Set "USB Mode" to "STORAGE."
Verify that the RC-505 itself is at the latest version.

UPDATE HISTORY

[ Ver.1.10 ] JUL 2016

Compatible with the RC-202.

DOWNLOAD AND EXPAND THE ARCHIVE FILE

Download the file named "bts_rc_w110_en.zip".
The downloaded file is an archive file in zip format. Double-click it to expand it.

HOW TO INSTALL

Going into the bts_rc_w110_en folder created by expanding bts_rc_w110_en.zip and double-clicking BOSS_TONE_STUDIO_for_RC_x86_en.msi starts installation.
Thereafter, follow the on-screen installation instructions to proceed with installation.
When the "Installation Complete" message appears, click [close] to finish.

STARTING THE APPLICATION

Turn on RC Series.
Connect RC Series and computer with USB cable.
For more information on how to make the connection, refer to the RC series owner's manual, "Connecting to Your Computer via USB."
Double click the BOSS TONE STUDIO for RC icon.

SYSTEM REQUIREMENTS

Microsoft(R) Windows(R) 10
Microsoft(R) Windows(R) 8.1
Microsoft(R) Windows(R) 8
Microsoft(R) Windows(R) 7

* If you're using Windows 8.1 or Windows 10, use BOSS TONE STUDIO for RC Ver. 1.2.0 for Windows.

Browser

Microsoft Internet Explorer 10 or later

* Internet connectivity is required for using functions of TONE CENTRAL and downloading updated version of TONE STUDIO. (Please note that you might be charged for packet fee depends on your connectivity service.)
* This software has been found to work on typical computers that meet the above requirements, but we do not guarantee that it will operate on all such computers. Please be aware that differences in design or conditions of use may produce differences in the processing power of otherwise similar computers.

Roland Software License Agreement

In no event shall Roland Corporation be liable to end-users for any damages whatsoever, including but not limited to financial damages for any loss of profits or information arising from the use of, or inability to use this updater. The foregoing provision is effective even if Roland Corporation has been advised of the possibility of such damages.

This is a legal agreement between you (an individual or a corporation) and Roland Corporation (herein referred to as "Roland") regarding the usage of this software product (herein referred to as "SOFTWARE"). Please read carefully the terms of this License Agreement before installing or using the SOFTWARE. By installing, copying, or starting the use of the SOFTWARE, you hereby consent to the terms of this License Agreement.

1. GRANT OF LICENSE

Roland grants you the following non-exclusive rights to use the SOFTWARE in accordance with the terms of this License Agreement.
(a) You may only use the SOFTWARE on a specific single computer at one time. Use of the SOFTWARE shall include loading the SOFTWARE into temporary memory (i.e., RAM) or installing the SOFTWARE into storage media (i.e., hard disk) of the computer on which you will use the SOFTWARE.
(b) You may make one copy of the SOFTWARE for backup purposes only (on floppy disk, magneto optical disk, DAT or the similar media), but you are prohibited to make any other copy.

2. COPYRIGHT

The SOFTWARE and its copyrights are the property of Roland and are protected by all international copyright laws and treaties.
Therefore, you must treat the SOFTWARE like any other copyrighted material (i.e., a book or a CD). All rights that are not provided for herein are reserved by Roland.

3. OTHER RESTRICTIONS

(a) You shall not modify, change, reverse engineer, decompile, or disassemble the SOFTWARE and the copyright notice and copyrighted logo.
Unauthorized copying, uploading to another network, distributing, modifying and/or attaching this software to other media or any other sales item is expressly forbidden.
(b) You shall not loan, rent, lease, sublicense or transfer the SOFTWARE, either in whole or in part, to any third party. But you may permanently transfer the SOFTWARE and accompanying printed materials provided you retain no copies of the Software and recipient agrees to the terms of this License Agreement. If the SOFTWARE has been updated or upgraded, any transfer of the SOFTWARE must include the most recent update and all prior versions.
(c) If this SOFTWARE contains multiple templates of media (such as floppy disks and CD-ROM) and these media contain the same software, you may use only the one form of media that is appropriate for your computer. You shall not use the remaining form(s) of media on another computer.
(d) You may not use the Software from multiple locations of a multi-user or networked system at any time.

3.2 Open source software and other third party software
(a) The SOFTWARE may use open source software and other third party software (herein referred to as "OSS, etc.").
(b) The OSS, etc. in the case of the preceding paragraph shall be subject to the OSS, etc. license (herein referred to as "OSS License"), and you shall comply with the OSS License.
(c) If there are any differences between the terms of this License Agreement and the OSS License, the OSS License shall prevail and the terms of this License Agreement shall not apply.

4. NO WARRANTY

Roland makes no warranty, either expressed or implied, with respect to any of the software, including, without limitation, any implied warranties of merchantability or fitness for a particular purpose.

5. NO LIABILITY

Roland can not reply to inquiries regarding this system software updater. Please read the instructions completely, and please note that you should use the SOFTWARE AT YOUR OWN RISK.
In no event shall Roland be liable to end-users for any damages whatsoever, including but not limited to financial damages for any loss of profits or information arising from the use of, or inability to use this product. The foregoing provision is effective even if Roland has been advised of the possibility of such damages. Even if the SOFTWARE has any material, verifiable, and reproducible program errors, Roland shall have no liability to modify such errors.

6. TERMINATION OF THE LICENSE

Roland reserves the right to terminate this License Agreement if you fail to comply with any of the terms of this License Agreement. Upon such termination, you shall immediately stop using the SOFTWARE.

7. GENERAL

(a) Any provision of this Agreement which is prohibited or unenforceable in any jurisdiction shall be ineffective to the extent of such prohibition or unenforceability without affecting, impairing or invalidating the remaining provisions hereof.
(b) This License Agreement shall be governed by and construed in accordance with the laws of State of California without reference to the principles of conflicts of laws.

BOSS TONE STUDIO for RC Ver.1.1.0 for Windows

Support

Quick Links