BOSS India - Support - RC-505 - Updates & Drivers

RC-505 Demo Data

What you will need to recover your RC-505

RC-505
USB cable (It must be compatible with USB 2.0 Hi-Speed.)
A computer with a USB connector (Windows, Mac OS X)

Getting the recover files

Please open/extract the downloaded “rc505_demo_data.zip” file on your computer to get the recover files in the “rc505_demo_data” folder.

Setting the USB Mode
Set the USB mode to STORAGE before you connect the RC-505 to your computer.

Press the [ SYSTEM ] button a number of times until the "USB Mode" parameter appears.
Turn the [ MEMORY/VALUE ] knob to select the "STORAGE."
Press the [ EXIT ] button.

Restoring the demo phrases to your RC-505

NOTE
* Performing this operation will erase all phrase memories that are currently saved in the RC-505. Be sure to make a backup before you proceed. (Refer to the "Backing up to your computer" of the owner's manual.)
* Put off one WAV file in the each folder "0XX_Y" in the folder "ROLAND" - "WAVE." (The XX in "0XX_Y" is the phrase memory number and the Y is the track number.)
* You must not do the following operations on restoring. Doing so might make your computer freeze, or might result in the loss of all of the RC-505's data.

Turn off the RC-505's power.
Disconnect the USB cable.
Allow your computer to enter suspend (standby) or hibernate mode, restart it, or shut it down.

Use an USB cable to connect the RC-505's USB connector to your computer's USB connector (a connector that supports USB 2.0 Hi-Speed).
When the connection to the computer is completed, the message "Idling..." appears.
* You can't make USB connections if the RC-505 is not stopped, or if there is a phrase that has not been saved
Back up the data as described below.

[ Windows users ]

Within My Computer (or Computer), open "BOSS_RC-505" (or Removable Disk).

[ Mac OS X users ]

On the desktop, open the "BOSS_RC-505" icon.

Recovering demo data from your computer to the RC-505
In the BOSS_RC-505 drive, delete the "ROLAND" folder, and then copy the "ROLAND" folder in the "rc505_demo_data" folder from your computer to the BOSS_RC-505 drive.

Writing individual WAV files from your computer to the RC-505's phrase memory
You can copy WAV files from your computer to the "001_1", "001_2", "001_3" - "099_1", "099_2", "099_3" folders within the "ROLAND" - "WAVE" folder in the BOSS_RC-505 drive (In the folder name "0XX_Y," the XX is the phrase memory number and the Y is the track number).
When you've finished copying WAV files, disconnect the USB drive as follows.

[ Windows users ]

Right-click on the "BOSS_RC-505" icon in My Computer (or the "Removable Disk (*:)" icon) and execute "Eject."

[ Mac OS X users ]

Drag the "BOSS_RC-505" icon to the trash ("Eject" icon).
Press the [ EXIT ] button of the RC-505.
To disconnect the connection, press the RC-505's [ WRITE ] button.

Roland Software License Agreement

In no event shall Roland Corporation be liable to end-users for any damages whatsoever, including but not limited to financial damages for any loss of profits or information arising from the use of, or inability to use this updater. The foregoing provision is effective even if Roland Corporation has been advised of the possibility of such damages.

This is a legal agreement between you (an individual or a corporation) and Roland Corporation (herein referred to as "Roland") regarding the usage of this software product (herein referred to as "SOFTWARE"). Please read carefully the terms of this License Agreement before installing or using the SOFTWARE. By installing, copying, or starting the use of the SOFTWARE, you hereby consent to the terms of this License Agreement.

1. GRANT OF LICENSE

Roland grants you the following non-exclusive rights to use the SOFTWARE in accordance with the terms of this License Agreement.
(a) You may only use the SOFTWARE on a specific single computer at one time. Use of the SOFTWARE shall include loading the SOFTWARE into temporary memory (i.e., RAM) or installing the SOFTWARE into storage media (i.e., hard disk) of the computer on which you will use the SOFTWARE.
(b) You may make one copy of the SOFTWARE for backup purposes only (on floppy disk, magneto optical disk, DAT or the similar media), but you are prohibited to make any other copy.

2. COPYRIGHT

The SOFTWARE and its copyrights are the property of Roland and are protected by all international copyright laws and treaties.
Therefore, you must treat the SOFTWARE like any other copyrighted material (i.e., a book or a CD). All rights that are not provided for herein are reserved by Roland.

3. OTHER RESTRICTIONS

(a) You shall not modify, change, reverse engineer, decompile, or disassemble the SOFTWARE and the copyright notice and copyrighted logo.
Unauthorized copying, uploading to another network, distributing, modifying and/or attaching this software to other media or any other sales item is expressly forbidden.
(b) You shall not loan, rent, lease, sublicense or transfer the SOFTWARE, either in whole or in part, to any third party. But you may permanently transfer the SOFTWARE and accompanying printed materials provided you retain no copies of the Software and recipient agrees to the terms of this License Agreement. If the SOFTWARE has been updated or upgraded, any transfer of the SOFTWARE must include the most recent update and all prior versions.
(c) If this SOFTWARE contains multiple templates of media (such as floppy disks and CD-ROM) and these media contain the same software, you may use only the one form of media that is appropriate for your computer. You shall not use the remaining form(s) of media on another computer.
(d) You may not use the Software from multiple locations of a multi-user or networked system at any time.

3.2 Open source software and other third party software
(a) The SOFTWARE may use open source software and other third party software (herein referred to as "OSS, etc.").
(b) The OSS, etc. in the case of the preceding paragraph shall be subject to the OSS, etc. license (herein referred to as "OSS License"), and you shall comply with the OSS License.
(c) If there are any differences between the terms of this License Agreement and the OSS License, the OSS License shall prevail and the terms of this License Agreement shall not apply.

4. NO WARRANTY

Roland makes no warranty, either expressed or implied, with respect to any of the software, including, without limitation, any implied warranties of merchantability or fitness for a particular purpose.

5. NO LIABILITY

Roland can not reply to inquiries regarding this system software updater. Please read the instructions completely, and please note that you should use the SOFTWARE AT YOUR OWN RISK.
In no event shall Roland be liable to end-users for any damages whatsoever, including but not limited to financial damages for any loss of profits or information arising from the use of, or inability to use this product. The foregoing provision is effective even if Roland has been advised of the possibility of such damages. Even if the SOFTWARE has any material, verifiable, and reproducible program errors, Roland shall have no liability to modify such errors.

6. TERMINATION OF THE LICENSE

Roland reserves the right to terminate this License Agreement if you fail to comply with any of the terms of this License Agreement. Upon such termination, you shall immediately stop using the SOFTWARE.

7. GENERAL

(a) Any provision of this Agreement which is prohibited or unenforceable in any jurisdiction shall be ineffective to the extent of such prohibition or unenforceability without affecting, impairing or invalidating the remaining provisions hereof.
(b) This License Agreement shall be governed by and construed in accordance with the laws of State of California without reference to the principles of conflicts of laws.

RC-505 Demo Data

Support

Quick Links