BOSS India - Support - - Updates & Drivers - VC-1-SH System Program Version 1.23.22

VC-1-SH System Program Version 1.23.22

This is the software to make your VC-1-SH up-to-date.

Use the latest version of VC-1 RCS

Before you start, make sure that the version of VC-1 RCS you're using is the most recent.

How to tell the version

Please check the version of the system working on your VC-1-SH before downloading the archive file.

Download and install appropriate VC-1 RCS for Windows or VC-1 RCS for Mac OS X onto your personal computer in advance.
Start VC-1 RCS.
Power on your VC-1-SH and connect it to the personal computer with a USB cable.
Click the [ Update ] button at upper-right on VC-1 RCS to open the "Update" dialog box.
Check the version number displayed in "Now Version".

* Don't perform the update if the product is already up-to-date.

Update history

[ Version 1.23.22 ]
Bug Fix
The following bug was fixed.

SDI signal output contains audio noise.

[ Version 1.22.21 ]
Bug Fix
The following bug was fixed.

The problem of an HD output signal from HDMI output being displayed at 4:3 despite being a 16:9 signal was corrected.

[ Version 1.21.21 ]
Functionality Improvements

Analog audio output is muted during times when no video signal is input.

Bug Fixes
The following bugs were fixed.

In rare cases, interruption of input occurs on 3G-SDI input.
In rare cases, video is not input when a signal is input from the matrix switcher.

Specification change

The audio of SDI output is always output 16 channels and silent audio data is output on unused channels.

[ Version 1.20.20 ]
Bug Fixes
The following bugs were fixed.

When audio data is embedded into a channel, noise is sometimes produced in other audio channels.
Available data is sometimes not input to the channel status of the audio data.

[ Version 1.10.10 ]
Specification change

The initial value of the HDCP Key Mask parameter was changed so that VC-1 operates as an HDCP-incompatible device with the default setting.

Functionality Improvements

Among the audio formats of HDMI output, the two-channel format was supported.
Resistance to jitter of HDMI input terminals was improved.

Bug Fixes
The following bugs were fixed.

The SDI audio is sometimes not properly received by some commercial devices.
When an unsupported format is input and then a supported format is input, the image is sometimes not displayed.

What you will need to update your VC-1-SH

VC-1-SH
A computer installed with one of the following operating systems under which VC-1 RCS is operating
Important
The update cannot be performed under Microsoft(R) Windows(R) 8.1.
When updating VC-1-SH, perform the update using a computer installed with one of the following operating systems. (2015/12/07)
- Microsoft(R) Windows(R) 10
- Microsoft(R) Windows(R) 8
- Microsoft(R) Windows(R) 7
- Microsoft(R) Windows Vista(R) SP1 以上
- Microsoft(R) Windows(R) XP SP3 以上
- Mac OS X v10.7 / OS X v10.8 / OS X v10.9 / OS X v10.10 / OS X v10.11
USB cable
VC-1 RCS for Windows or VC-1 RCS for Mac OS X

Caution when performing the update

Never apply this update data to any product other than the VC-1-SH. This update data may destroy the data or system program of other products.
Never power-off your VC-1-SH while the update is in progress!
If a power failure or similar accident occurs during the update process, the VC-1-SH won’t be able to start up in normal operating mode. This will require servicing, so you will need to contact Roland service center near you if this occurs.
We regret that we are unable to answer questions regarding the update procedure using this system program. Please perform the update responsibly, following the directions given in this document.

Getting the update file

Please open/extract the downloaded " vc1sh_sys_v12322.zip " file on your computer to get the update files in the " vc1sh_sys_v12322 " folder.

Procedure for the update
Caution

You must not rename the extracted files.
Never turn off the VC-1-SH's power while the update is in progress. Otherwise the system program or the VC-1-SH itself may be destroyed.

Please install the extracted system program files into your VC-1-SH according to the following procedure.

Install VC-1 RCS into a Windows PC or a Mac.
Start VC-1 RCS.
Power on your VC-1-SH and connect it to a Windows personal computer or a Mac computer with a USB cable.
* When updating multiple VC-1-SH units, do not connect them to your personal computer together.
Click the [ Update ] button at upper-right on VC-1 RCS to open the "Update" dialog box.
Click the [ Bin File ] button to select " VC-1-SH_ALL012322.bin " in the personal computer.
* Dragging and dropping "VC-1-SH_ALL012322.bin" into the "Update" dialog box are also available.
Click the [ Update ] button.
* It will take approximately two minutes.
When "Please Reboot Device!!!" is displayed on the right of the [ Update ] button, the update is completed.
Power on your VC-1-SH again.
Check that "Complete." is displayed on the right of the [ Update ] button and then click [ OK ].
Power off your VC-1-SH and exit VC-1 RCS to complete the update.
* The update may fail due to a communication failure or contact failure. In such a case, click the [ Cancel ] button to close the "Update" dialog box, and then perform all the steps again from 3.

Roland Software License Agreement

In no event shall Roland Corporation be liable to end-users for any damages whatsoever, including but not limited to financial damages for any loss of profits or information arising from the use of, or inability to use this updater. The foregoing provision is effective even if Roland Corporation has been advised of the possibility of such damages.

This is a legal agreement between you (an individual or a corporation) and Roland Corporation (herein referred to as "Roland") regarding the usage of this software product (herein referred to as "SOFTWARE"). Please read carefully the terms of this License Agreement before installing or using the SOFTWARE. By installing, copying, or starting the use of the SOFTWARE, you hereby consent to the terms of this License Agreement.

1. GRANT OF LICENSE

Roland grants you the following non-exclusive rights to use the SOFTWARE in accordance with the terms of this License Agreement.
(a) You may only use the SOFTWARE on a specific single computer at one time. Use of the SOFTWARE shall include loading the SOFTWARE into temporary memory (i.e., RAM) or installing the SOFTWARE into storage media (i.e., hard disk) of the computer on which you will use the SOFTWARE.
(b) You may make one copy of the SOFTWARE for backup purposes only (on floppy disk, magneto optical disk, DAT or the similar media), but you are prohibited to make any other copy.

2. COPYRIGHT

The SOFTWARE and its copyrights are the property of Roland and are protected by all international copyright laws and treaties.
Therefore, you must treat the SOFTWARE like any other copyrighted material (i.e., a book or a CD). All rights that are not provided for herein are reserved by Roland.

3. OTHER RESTRICTIONS

(a) You shall not modify, change, reverse engineer, decompile, or disassemble the SOFTWARE and the copyright notice and copyrighted logo.
Unauthorized copying, uploading to another network, distributing, modifying and/or attaching this software to other media or any other sales item is expressly forbidden.
(b) You shall not loan, rent, lease, sublicense or transfer the SOFTWARE, either in whole or in part, to any third party. But you may permanently transfer the SOFTWARE and accompanying printed materials provided you retain no copies of the Software and recipient agrees to the terms of this License Agreement. If the SOFTWARE has been updated or upgraded, any transfer of the SOFTWARE must include the most recent update and all prior versions.
(c) If this SOFTWARE contains multiple templates of media (such as floppy disks and CD-ROM) and these media contain the same software, you may use only the one form of media that is appropriate for your computer. You shall not use the remaining form(s) of media on another computer.
(d) You may not use the Software from multiple locations of a multi-user or networked system at any time.

3.2 Open source software and other third party software
(a) The SOFTWARE may use open source software and other third party software (herein referred to as "OSS, etc.").
(b) The OSS, etc. in the case of the preceding paragraph shall be subject to the OSS, etc. license (herein referred to as "OSS License"), and you shall comply with the OSS License.
(c) If there are any differences between the terms of this License Agreement and the OSS License, the OSS License shall prevail and the terms of this License Agreement shall not apply.

4. NO WARRANTY

Roland makes no warranty, either expressed or implied, with respect to any of the software, including, without limitation, any implied warranties of merchantability or fitness for a particular purpose.

5. NO LIABILITY

Roland can not reply to inquiries regarding this system software updater. Please read the instructions completely, and please note that you should use the SOFTWARE AT YOUR OWN RISK.
In no event shall Roland be liable to end-users for any damages whatsoever, including but not limited to financial damages for any loss of profits or information arising from the use of, or inability to use this product. The foregoing provision is effective even if Roland has been advised of the possibility of such damages. Even if the SOFTWARE has any material, verifiable, and reproducible program errors, Roland shall have no liability to modify such errors.

6. TERMINATION OF THE LICENSE

Roland reserves the right to terminate this License Agreement if you fail to comply with any of the terms of this License Agreement. Upon such termination, you shall immediately stop using the SOFTWARE.

7. GENERAL

(a) Any provision of this Agreement which is prohibited or unenforceable in any jurisdiction shall be ineffective to the extent of such prohibition or unenforceability without affecting, impairing or invalidating the remaining provisions hereof.
(b) This License Agreement shall be governed by and construed in accordance with the laws of State of California without reference to the principles of conflicts of laws.

VC-1-SH System Program Version 1.23.22

Support

Quick Links